A.7.8 Create Rec Disk Buffer - Fujitsu ETERNUS DX60 S3 User Manual

Appendix A Parameter List
A.7 Advanced Copy Management
A.7.8 Create REC Disk Buffer
For details about this function, refer to
For the factory default settings for this function, refer to
●
New RAID Group
• Name
Description
Input condition/
Display contents
●
Manual Setting
• Controlling CM
Description
Input condition/
Display contents
• Encryption by CM
Description
Input condition/
Display contents
"7.8.7 Create REC Disk Buffer" (page
Input a RAID group name to be created.
An existing RAID group name cannot be used.
•
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
Specify the Controlling CM of the RAID group to be created.
""Automatic" and the normal CM number ("CE#x CM#y" or "CM#y") that is installed are
displayed (x: CE number, y: CM number).
Select "Automatic" for normal operations. When "Automatic" is selected, the Controlling
CM that is to be allocated is determined by the RAID group number. Refer to
Controlling CM setting" (page 910)
•
For the ETERNUS DX8700 S3/DX8900 S3
-
Automatic
-
CE#x CM#y
•
For the other models
-
Automatic
-
CM#y
Select the RAID group encryption status with the radio button.
When the encryption mode is disabled, "On" cannot be selected.
When "On" is specified for "Encryption by CM", select Online, Nearline, or SSD type drives.
•
On
Use a CM to perform encryption
•
Off
Perform encryption without using a CM
962
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
645).
"Appendix B Create REC Disk Buffer" (page
for details.
1011).
"Automatic
P2X0-1270-13ENZ0