Fujitsu ETERNUS DX60 S3 User Manual page 711

Appendix A Parameter List
A.1 System Management
• MIB-II RFC Version
Description
Input condition/
Display contents
A.1.7.4 Setup SNMP Manager
For details about this function, refer to
For the factory default settings for this function, refer to
●
Manager
• IP Version
Description
Input condition/
Display contents
• Manager IP Address (IPv4)
Description
Input condition/
Display contents
• Manager IP Address (IPv6)
Description
Input condition/
Display contents
When enabling the SNMP function, select the MIB-II support RFC version.
Although it is not necessary to change the default setting ("RFC1213") for normal use,
select the RFC version that is supported by the SNMP manager.
•
RFC1213
This mode is used for MIB-II that supports RFC1213.
This RFC supports IPv4 addresses.
•
RFC4293
This mode is used for MIB-II that supports RFC4293.
This RFC supports IPv4 addresses and IPv6 addresses. This RFC is an extended
definition for RFC1213.
"1.8.4 Setup SNMP Manager" (page
Specify the IP address of the SNMP Manager.
•
IPv4
•
IPv6
Input the IP address of the SNMP Manager with the IPv4 format.
The IP address which has already been used cannot be entered.
This setting is enabled when "IPv4" is selected for "IP Version".
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
Input the IP address of the SNMP Manager with the IPv6 format.
The following IPv6 addresses can be used; "link local address", "global address", "unique
local address", or "6to4 address". Refer to
details.
The IP address which has already been used cannot be entered.
This setting is enabled when "IPv6" is selected for "IP Version".
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
711
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
113).
"Appendix B Setup SNMP Manager" (page
"Available IPv6 Address" (page 107)
for details.
980).
for
P2X0-1270-13ENZ0