Delete Iscsi Host - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Connectivity Management
4.2 Host Group Management
2
Click the [OK] button.
 Deletion of the FC host starts.
3
Click the [Done] button to return to the [FC/FCoE Host] screen.
4.2.13

Delete iSCSI Host

This function deletes an iSCSI host.
When an iSCSI host belongs to a host group, the iSCSI host can be deleted, irrespective of its host affinity
settings.
• Not all of the hosts can be deleted from a host group.
• When an iSCSI host does not belong to a host group, the iSCSI host, of which host affinity settings have
been configured, cannot de deleted.
When a host in the host group for which the host affinity settings are already configured is deleted, the path
from the host to the port is also deleted.
The procedure to delete an iSCSI host is as follows:
Procedure
1
Select the iSCSI host to be deleted (multiple selections can be made) and click [Delete iSCSI
Host] in [Action].
 A confirmation screen appears.
If an error screen appears under the following conditions, check the parameter settings.
• The selected iSCSI host is the last host in a host group
• The selected iSCSI host does not belong to any host group and the host affinity setting has been
configured for the target iSCSI host
421
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0