Fujitsu ETERNUS DX60 S3 User Manual page 349

Chapter 4 Connectivity Management
4.1 Host Affinity Management
8
After confirming the host affinity settings, click the [Create] button.
If an error screen appears under the following conditions, check the parameter settings.
• When the host interface type of the host and the CA type of the CA port do not match
Note that the CA types of "FCoE" and "FC" are regarded as the same CA type.
• When the number of host affinities exceeds the maximum number per ETERNUS DX
• When the number of hosts exceeds the maximum number per CA port
• When a host cannot recognize some LUNs
 A confirmation screen appears.
9
Click the [OK] button.
 The host affinity creation starts.
10
Click the [Done] button to return to the [Connectivity] screen.
349
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0