Chapter 3 Volume Management
3.9 Start RAID Migration
Requirements for a migration source volume:
•
The "Type" is "Standard", "WSV", "TPV", or "FTV"
•
The "Status" is not "
•
Formatting is not being performed (only when the volume type is "Standard" or "WSV")
•
Migration is not being performed (the target volume is not used as a migration source or a migration
destination)
•
TPV balancing is not being performed
•
FTRP balancing is not being performed (*1)
•
LDE is not being performed for the RAID group to which the target volume belongs
•
Encryption is not being performed for the target volume
•
A Storage Migration path is not created in the target volume
*1:
When the FTRP balancing is performed, the FTV balancing process starts in the FTSP. Refer to
Balancing Flexible Tier Pool" (page 587)
Requirements for a migration destination RAID group:
•
The maximum number of volumes are not set in the destination RAID group
Migration creates new volumes. The maximum number of volumes that can be created depends on the
ETERNUS DX model.
ETERNUS DX60 S3
ETERNUS DX100 S3
ETERNUS DX200 S3
ETERNUS DX500 S3/DX600 S3
ETERNUS DX8700 S3/DX8900 S3
ETERNUS DX200F
•
"Standard", "WSV", "Snap Data Volume (SDV)", or "Snap Data Pool Volume (SDPV)" is registered in the RAID
group or the RAID group is not being used
•
The RAID group does not belong to a TPP
•
The RAID group does not belong to an FTRP
•
The RAID group is not registered as an REC Disk Buffer
•
The RAID group is not registered as an EXCP
•
The "Status" of the RAID group is "
•
The RAID group is not blocked
•
The free space of the RAID group is more than the capacity of the migration source volume (*1)
•
The RAID group is not the same RAID group as the RAID group to which the migration source volume
belongs
•
LDE is not being performed in the target RAID group
*1:
When the migration source is a TPV or an FTV, the capacity of the migration source volume indicates the logical
capacity of the TPV or the FTV.
Broken"
for details.
Model
Available"
303
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
per RAID group
Up to 128
"6.11 Start
per ETERNUS DX
Up to 1024
Up to 2048
Up to 4096
Up to 16384
Up to 65535
Up to 1536
P2X0-1270-13ENZ0