Fujitsu ETERNUS DX60 S3 User Manual page 648

Chapter 7 Advanced Copy Management
7.8 REC Management
The main setting items are as follows.
• Checkbox to select drives
■ When selecting drives from the installation image
Click the [Graphic] tab to select drives from the drive installation image. The installation images of all
the drives installed in the ETERNUS DX are displayed. Checkboxes are displayed for unused drives.
The main setting items are as follows.
• DE selection list box
• Checkbox to select drives
• When SSD-Ms with an interface speed of 12Gbit/s are installed in a high-density drive enclosure,
the SSDs operate at 6Gbit/s because the interface speed of the high-density drive enclosure is
6Gbit/s.
• If an error screen appears under the following conditions, check the parameter settings.
-
-
4
Click the [Create] button.
 A confirmation screen appears.
5
Click the [OK] button.
 Creation of an REC Disk Buffer starts.
6
Click the [Done] button to return to the [REC Disk Buffer] screen.
The selected drives do not satisfy the input conditions
The drive layout does not satisfy the required conditions
(Refer to "Conditions for the ETERNUS DX8700 S3/DX8900 S3 drive layout" (page 528)
details.)
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
648
for
End of procedure
P2X0-1270-13ENZ0