Fujitsu ETERNUS DX60 S3 User Manual page 833

Appendix A Parameter List
A.4 Connectivity Management
■ When registering a host by manually specifying the host
●
Host Setting
• iSCSI Name
Description
Input condition/
Display contents
For setting items, refer to
(page 830).
A.4.2.9 Add SAS Host
For details about this function, refer to
For the factory default settings for this function, refer to
■
When registering a host by selecting from the host list
●
Host Setting
• Checkbox to select a host
Description
Input condition/
Display contents
• Name
Description
Input condition/
Display contents
Input the iSCSI name of the iSCSI host (required).
•
4 - 223 alphanumeric characters and symbols ('-', '.', ':')
•
The name starts with "iqn." or "eui."
"Host Setting" (page 830) in "When registering a host by selecting from the host list"
"4.2.11 Add SAS Host" (page
Select the checkbox of the SAS host that is to be registered in the ETERNUS DX.
The host name and host response can only be specified for the selected SAS host.
Checkbox
•
Selected
•
Cleared
Input the name for the SAS host.
Up to 16 alphanumeric characters, symbols (except "," (comma) and "?"), and spaces
833
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
416).
"Appendix B Add SAS Host" (page 993).
P2X0-1270-13ENZ0