Fujitsu ETERNUS DX60 S3 User Manual page 892

Appendix A Parameter List
A.4 Connectivity Management
• IPv6 Connect IP Address
Description
Input condition/
Display contents
• IPv6 Gateway
Description
Input condition/
Display contents
• IPv6 Prefix length
Description
Input condition/
Display contents
A.4.7.4 Modify NAS Interface
For details about this function, refer to
●
NAS Interface Settings
• RIP Setting
Description
Input condition/
Display contents
Input the IPv6 connect IP address of the target port.
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
Input the IPv6 gateway address of the target port.
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
Input the IPv6 prefix length of the target port.
3 - 128
"4.8.6 Modify NAS Interface" (page
Select whether to receive the routing information with the target port.
To receive the routing information with the target port, select "Enable". To stop receiving
the routing information, select "Disable".
The RIP is used to share the routing information between routers, and to simplify the
network settings.
•
Enable
•
Disable
892
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details.
for details.
510).
P2X0-1270-13ENZ0