Firmware Management; A.1.13 Firmware Management - Fujitsu ETERNUS DX60 S3 User Manual

Appendix A Parameter List
A.1 System Management
• Remote Session Timeout
Description
Input condition/
Display contents
A.1.12.7 Import Root Certificate
For details about this function, refer to
●
Root Certificate Setting
• Root certificate file
Description
Input condition/
Display contents
A.1.13

Firmware Management

A.1.13.1 Apply Controller Firmware
For details about this function, refer to
For the factory default settings for this function, refer to
●
Controller Firmware Archive Settings
• Controller Firmware Archive
Description
Input condition/
Display contents
Select the timeout limit for remote session connection.
When not setting the timeout limit, select "Unlimited".
When "Permit" is selected for "Remote Session", monitoring of the remote sessions starts.
If the time exceeds the specified value without a remote session connection, remote
session permission is automatically disabled and the set state changes to "Forbid". If a
remote session connection is detected while monitoring is being performed, the timer is
suspended during connection. After connection is complete, the timer is reset to "0" and
monitoring starts again.
Selecting the timeout limit is only available when "Permit" is selected for "Remote
Session".
•
1 - 24 hours
•
Unlimited
"1.14.6 Import Root Certificate" (page
Click the [Browse...] button to specify the root certificate file, or directly input the path to
the root certificate file.
•
Click the [Browse...] button to specify the root certificate file
•
Directly input the path to the root certificate file
"1.15.1 Apply Controller Firmware" (page
Select the controller firmware archive.
•
Latest Version
Select the latest controller firmware archive. This item is displayed only when the
controller firmware archive newer than the currently active firmware exists in BUD.
•
Set File
Select the controller firmware archive that is stored in the setting PC.
Click the [Browse...] button to specify the location of the archive.
The specified controller firmware archive is stored in the BUD.
778
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
213).
215).
"Appendix B Apply Controller Firmware" (page 987).
P2X0-1270-13ENZ0