Delete Sas Host - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Connectivity Management
4.2 Host Group Management
2
Click the [OK] button.
 Deletion of the iSCSI host starts.
3
Click the [Done] button to return to the [iSCSI Host] screen.
4.2.14

Delete SAS Host

This function deletes a SAS host.
When a SAS host belongs to a host group, the SAS host can be deleted, irrespective of its host affinity settings.
• Not all of the hosts can be deleted from a host group.
• When a SAS host does not belong to a host group, the SAS host, of which host affinity settings have been
configured, cannot de deleted.
When a host in the host group for which the host affinity settings are already configured is deleted, the path
from the host to the port is also deleted.
The procedure to delete a SAS host is as follows:
Procedure
1
Select the SAS host to be deleted (multiple selections can be made) and click [Delete SAS
Host] in [Action].
If an error screen appears under the following conditions, check the parameter settings.
• The selected SAS host is the last host in a host group
• The selected SAS host does not belong to any host group and the host affinity setting has been
configured for the target SAS host
 A confirmation screen appears.
422
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0