Modify Radius - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 1 System Management
1.7 User Management
2
Click the [Initialize] button.
 A confirmation screen appears.
3
Click the [OK] button.
 The user account initialization starts.
4
Click the [Done] button to return to the [Define Role] screen.
1.7.3

Modify RADIUS

This function specifies the external server (RADIUS server) that is used for authentication when logging in.
Up to two RADIUS Authentication servers can be registered.
• Enable or disable RADIUS Authentication for each storage system.
• If RADIUS Authentication fails when "No" has been selected for "Recovery Mode" in the RADIUS Setting
field, logging in to ETERNUS Web GUI will not be available.
• RADIUS Authentication cannot be used when logging in to the Slave CM.
• When "Yes (Communication error)" has been selected for "Recovery Mode" in the RADIUS Setting field,
Internal Authentication (*1) is performed if authentication fails in both the primary and the secondary
servers due to a network error in either or both of the servers.
*1: This is the standard authentication type. Internal Authentication uses user account information stored in the
storage system to verify the input user account.
90
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0