Fujitsu ETERNUS DX60 S3 User Manual page 232

Chapter 2 Component Management
2.3 Assign Dedicated Hot Spare
For "Drive Type" in the "Assign RAID Group" field, the drive type registered in the RAID group is
displayed. If multiple drive types are used in the ETERNUS DX, the drive type is displayed as described
below:
• If only "Online" type drives are used or if both "Online" and "Nearline" type drives are used, "Online"
is displayed.
• If only "Online SED" type drives are used or if both "Online SED" and "Nearline SED" type drives are
used, "Online SED" is displayed.
• If a single SSD type (SSD-M/SSD) is used or if multiple SSD types (SSD-M/SSD) are used, "SSD" is
displayed.
3
Click the [OK] button.
 Registration of the Dedicated Hot Spare starts.
4
Click the [Done] button to return to the [Drives] screen.
232
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0