Appendix A Parameter List
A.3 Volume Management
A.3.6
Set Allocation
For details about this function, refer to
For the factory default settings for this function, refer to
●
Allocation Settings
•
Allocation
Description
Input condition/
Display contents
Regardless of the allocation method (Thin or Thick) of the selected volume, "Thin" is selected when this function
starts.
A.3.7
Start RAID Migration
For details about this function, refer to
For the factory default settings for this function, refer to
●
Setting Volume
•
Migration Destination
Description
Input condition/
Display contents
•
In the following conditions, select "RAID Group / Thin Provisioning Pool / Flexible Tier Pool" for "Migration
Destination".
-
An ODX Buffer volume is selected as a migration source volume.
-
A NAS user volume, a NAS backup volume, or a NAS system volume is selected as a migration source volume
(only "Thin Provisioning Pool" can be selected as the migration destination.)
-
A migration source FTV usage is "System"
(only "Flexible Tier Pool" can be selected as the migration destination.)
•
For the volume used by the Storage Cluster function, the type (Standard/WSV/TPV/FTV) cannot be changed.
Select the migration destination to match the migration source volume type.
"3.7.8 Set Allocation" (page
Select the allocation method.
•
Thin
•
Thick
"3.9 Start RAID Migration" (page
Select the migration destination of the volume.
•
RAID Group / Thin Provisioning Pool / Flexible Tier Pool
•
Wide Striping Volume
799
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
295).
"Appendix B Set Allocation" (page
301).
"Appendix B Start RAID Migration" (page
989).
989).
P2X0-1270-13ENZ0