Fujitsu ETERNUS DX60 S3 User Manual page 630

Chapter 7 Advanced Copy Management
7.8 REC Management
• If all the controller firmware versions for the ETERNUS DX S3 series in the copy path information
file are "V10L40 and later", save the copy path information file as "ETERNUS DX S3 series (Target :
V10L40 and later)". If all the controller firmware versions for the ETERNUS DX S3 series in the copy
path information file are "earlier than V10L40", save the copy path information file as "ETERNUS
DX S3 series (Target : earlier than V10L40)". If the controller firmware versions in the copy path
information file are both "V10L40 and later" and "earlier than V10L40", save both the copy path
information files as "ETERNUS DX S3 series (Target : V10L40 and later)" and "ETERNUS DX S3 series
(Target : earlier than V10L40)".
For ETERNUS DX storage systems with the controller firmware versions V10L40 and later, the copy
path information file that is saved in "ETERNUS DX S3 series (Target : V10L40 and later)" must be
applied. Similarly, for the ETERNUS DX storage systems with the controller firmware versions
earlier than V10L40, the copy path information file that is saved in "ETERNUS DX S3 series (Target :
earlier than V10L40)" must be applied.
• To edit the copy path information file for the ETERNUS DX S3 series using this function, use the
copy path information file that was saved as "ETERNUS DX S3 series (Target : V10L40 and later)".
Note that this function cannot edit the copy path information file that is saved in "ETERNUS DX S3
series (Target : earlier than V10L40)".
2
Save the copy path information for each model.
The default file name depends on the model.
• For the ETERNUS DX
The default file name is "RecPath_serial number for the ETERNUS DX_YYYY-MM-DD_hh-mm-ss.bin".
(YYYY-MM-DD_hh-mm-ss: the date and time when the save screen
• For the other ETERNUS Disk storage systems
The default file name is "RecPathConvt_serial number for the ETERNUS Disk storage system_YYYY-
MM-DD_hh-mm-ss.bin". (YYYY-MM-DD_hh-mm-ss: the date and time when the save screen
is displayed.)
630
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
(Step 1) is displayed.)
(Step
P2X0-1270-13ENZ0
1)