Fujitsu ETERNUS DX60 S3 User Manual page 776

Appendix A Parameter List
A.1 System Management
• Automatic Log Transmission
Description
Input condition/
Display contents
• Proxy Server
Description
Input condition/
Display contents
• Port No.
Description
Input condition/
Display contents
• Connection Type
Description
Input condition/
Display contents
• User Name
Description
Input condition/
Display contents
Select whether to enable or disable the automatic log transmission.
When "Automatic Log Transmission" is enabled and notification of Error Severity Level or
Warning Level occurs, a log is collected and sent to the AIS Connect server in
approximately five minutes. The maximum size of a log is 1.44MB. Note that I/O Module
logs are not included.
If a send log request is already performed once log collection is complete, send log
requests are not performed. If a communication error occurs and a connection to the AIS
Connect server cannot be established, logs cannot be sent. A log that fails to be sent is
not resent.
•
Enable
•
Disable
Input the IPv4 address or the FQDN of the proxy server.
Make sure to input "Proxy Server" and "Port No." together.
If a proxy server is not used, this item does not need to be set.
•
For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
•
For FQDN
Up to 63 alphanumeric characters and symbols ("." (dot), ":" (colon), "-" (hyphen),
and "_ " (underscore) can be used)
Input the port number of the proxy server.
Make sure to input "Proxy Server" and "Port No." together.
If a proxy server is not used, this item does not need to be set.
0 - 65535
Select the communication method for the proxy server.
•
HTTP
Basic/NTLM HTTP authentication
•
SOCKS
SOCKSv5 authentication
Specify the user name for the proxy server authentication.
If a proxy server is not used, this item does not need to be set.
Up to 32 alphanumeric characters and symbols
776
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0