Delete Host Response - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Connectivity Management
4.5 Host Response Management
The main setting items are as follows.
●
Host Response Name
• Name
●
ALUA Settings
• Asymmetric / Symmetric Logical Unit Access
• TPGS Mode
• TPG Referrals Mode
If an error screen appears under the following conditions, check the parameter settings.
• The "Name" is not entered
• The "Name" does not satisfy the input conditions
• The "Name" matches with an existing host response name
3
Click the [Add] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Addition of the host response starts.
5
Click the [Done] button to return to the [Host Response] screen.
4.5.2

Delete Host Response

This function deletes a host response.
• A host response that is being used cannot be deleted. In this case, release the assignment from the host
groups or the hosts before performing this function.
• The recommended pattern and the default setting of the host response cannot be deleted.
The procedure to delete a host response is as follows:
Procedure
1
Select the host response to be deleted (multiple selections can be made) and click [Delete
Host Response] in [Action].
 A confirmation screen appears.
473
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0