A.7.11 Create Odx Buffer Volume - Fujitsu ETERNUS DX60 S3 User Manual

Appendix A Parameter List
A.7 Advanced Copy Management
• Bandwidth Limit
Description
Input condition/
Display contents
●
Advanced Copy Path
• Bandwidth Limit
Description
Input condition/
Display contents
A.7.11 Create ODX Buffer Volume
For details about this function, refer to
For the factory default settings for this function, refer to
●
ODX Buffer Volume
• Name
Description
Input condition/
Display contents
When "Set the same Bandwidth Limit for all paths" is selected for the setting mode,
enter the bandwidth limit.
When "0" is entered, the bandwidth limit is "Unlimited".
When "Set the Bandwidth Limit for each path" is selected for the setting mode, the field
is blank. Set the bandwidth limit for each path in the "Advanced Copy Path" field.
•
0 - 65535 (Mbit/s)
•
Blank
Enter the bandwidth limit for each path.
When "0" is entered, the bandwidth limit is "Unlimited".
0 - 65535 (Mbit/s)
"7.9.3 Create ODX Buffer Volume" (page
Input the ODX Buffer volume name.
An existing volume name cannot be specified.
Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
966
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
662).
"Appendix B Create ODX Buffer Volume" (page 1013).
P2X0-1270-13ENZ0