Appendix A Parameter List
A.4 Connectivity Management
•
IPv6 Connect IP Address
Description
Input condition/
Display contents
•
IPv6 Gateway
Description
Input condition/
Display contents
•
IPv6 Prefix length
Description
Input condition/
Display contents
A.4.7.5
Change NAS Server Name
For details about this function, refer to
For the factory default settings for this function, refer to
●
NAS Server Settings
•
Name
Description
Input condition/
Display contents
Input the IPv6 connect IP address of the target port.
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to
"IPv6 Address Notation" (page 378)
Input the IPv6 gateway address of the target port.
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to
"IPv6 Address Notation" (page 378)
Input the IPv6 prefix length of the target port.
3 - 128
"4.8.7 Change NAS Server Name" (page
Input the NAS server name for the ETERNUS DX S3 series.
Up to 15 alphanumeric characters and symbols (in the US-ASCII format)
The following list shows the available characters:
•
0 (0x30) - 9 (0x39)
•
A (0x41) - Z (0x5A), a (0x61) - z (0x7A)
•
A hyphen (0x2D) except as the first and/or the last character
894
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details.
for details.
512).
"Appendix B Change NAS Server Name" (page
1002).
P2X0-1270-13ENZ0