Fujitsu ETERNUS DX60 S3 User Manual page 403

Chapter 4 Connectivity Management
4.2 Host Group Management
• If the SAS address is not displayed when clicking the [Rediscover] button, make sure that there is
no error in the connection environment, such as the connection between the host and the switch,
and the CA port settings of the ETERNUS DX. If there is no error in the connection environment,
contact the Support Department or manually specify the SAS address.
• If an error screen appears under the following conditions, check the parameter settings.
-
-
-
-
-
-
(3)
Click the [Modify] button
 A confirmation screen appears.
■ When adding a host by manually specifying the host
(1)
Click the [Manual Input] tab.
(2)
Click the [Add] button.
 The [Add SAS Host] screen appears.
The "Host Group Name" is not entered
The "Host Group Name" does not satisfy the input conditions
The "Host Group Name" overlaps with an existing host group name (Host group names cannot
overlap with any other host group names, irrespective of the interface types.)
A host cannot recognize some LUNs
Nine or more hosts are registered in the host group or no hosts are registered in the host group
The total number of hosts has exceeded the maximum number for the ETERNUS DX
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
403
P2X0-1270-13ENZ0