Modify Sas Host - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Connectivity Management
4.2 Host Group Management
5
Click the [Done] button to return to the [iSCSI Host] screen.
4.2.17

Modify SAS Host

This function changes the SAS host information.
• When no SAS hosts are registered, the [Modify SAS Host] function cannot be used.
• When changing the SAS address of a SAS host that is currently being used, make sure to stop access to
that SAS host.
• This function can change the following SAS host information; "Name" and "SAS Address". When the SAS
host is not registered in a host group, the "Host Response" setting can also be changed.
• When the SAS host is registered in a host group, use the [Modify Host Group] function to change the host
response. Refer to
For details on the parameters for this function, refer to
The procedure to change the SAS host information is as follows:
Procedure
1
Select the SAS host to change the host information for, and click [Modify SAS Host] in
[Action].
2
Input new host information.
"4.2.8 Modify Host Group (SAS)" (page 399)
427
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details.
"A.4.2.12 Modify SAS Host" (page
End of procedure
838).
P2X0-1270-13ENZ0