Fujitsu ETERNUS DX60 S3 User Manual page 261

Chapter 3 Volume Management
3.1 Create Volume
• Setting items when "Use all Largest Free Space" is specified
New Volume
Manual
Setting or
Manual
Setting
(Volume
Information)
Manual
Setting
(Select RAID
Group
Information)
✓: Required settings
Blank: Settings that are not required
-: N/A
*1: The following items are advanced settings. It is not necessary to change the default setting for normal use.
•
"Wide Stripe Size" and "Concatenation Order" under the "Manual Setting (Volume Information)" field.
•
"Stripe Depth" under the "Manual Setting (Select RAID Group Information)" field.
Setting items Standard
Name
Capacity
Type
Capacity of source
volume only
SDV
Allocation
RAID Group/TPP
Manual
Selection
Data Integrity
Use all Largest
Free Space
Volume No.
Encryption by CM
Number of
Volumes (RAID
group)
Number of
Volumes (TPP)
Number of
Volumes (WSV)
Drive Type
RAID Level
Number of
Member Drives
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
SDPV WSV (*1)
✓ ✓ ✓
✓ ✓ ✓
✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ –
– – –
– – ✓
✓
– –
– – ✓
✓
– –
261
Remarks
"Off" (fixed) when the encryption
mode is disabled or when the drive
type is "Online SED", "Nearline SED", or
"SSD SED"
P2X0-1270-13ENZ0