A.7.9 Modify Rec Multiplicity - Fujitsu ETERNUS DX60 S3 User Manual

Appendix A Parameter List
A.7 Advanced Copy Management
●
Advanced Setting
Stripe Depth should be set only when advanced tuning needs to be performed for each RAID group
configuring the REC disk buffer. It is not necessary to change the default value (64KB) for normal use.
• Stripe Depth
Description
Input condition/
Display contents
A.7.9 Modify REC Multiplicity
For details about this function, refer to
For the factory default settings for this function, refer to
●
Remote Box ID List
• Priority Level
Description
Input condition/
Display contents
• Specification Mode
Description
Input condition/
Display contents
Select the Stripe Depth of the RAID group that is to be created.
•
64 KB
•
128 KB
•
256 KB
•
512 KB
•
1024 KB
"7.8.11 Modify REC Multiplicity" (page
Select the priority level.
When the "Connection Type" is "Remote", a "-" (hyphen) is displayed.
•
Automatic
REC is performed using the priority level (Automatic Priority/High Priority/Middle
Priority/Low Priority/Very Low Priority) that is specified in
(page 600).
•
1 - 8
Specify from "1" to "8" for the REC priority level. "1" corresponds to "Very Low Priority",
and "8" corresponds to "High Priority" in
•
"-" (hyphen)
Select the specification mode for multiplicity.
When the "Connection Type" is "Direct", a "-" (hyphen) is displayed.
•
Automatic
•
Manual
•
"-" (hyphen)
964
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
656).
"Appendix B Modify REC Multiplicity" (page
"7.5 Modify EC/OPC Priority"
"7.5 Modify EC/OPC Priority" (page
1012).
600).
P2X0-1270-13ENZ0