Appendix A Parameter List
A.1 System Management
●
Result Notification Information
•
Administrator
Description
Input condition/
Display contents
•
Connection check operator
Description
Input condition/
Display contents
•
Connection check operator E-Mail Address
Description
Input condition/
Display contents
●
Time Information
The timer parameter settings do not normally require modification.
If changing the default value, select the "Change following Timing Parameter items" checkbox.
•
SMTP Connection Timeout
Description
Input condition/
Display contents
•
SMTP Response Timeout
Description
Input condition/
Display contents
Select "Notification" or "Not Notification" for your administrator of the setting
confirmation result at the REMCS center.
Select "Notification" for the "Administrator" or the "Connection check operator" and
confirm the result.
•
Notification
•
Not Notification
Select "Notification (Standard E-Mail format)", "Notification (Simple E-Mail format for
cell phone)" or "Not Notification" for the connection check operator of the setting
confirmation result at the REMCS center.
If notifying, input the "Connection check operator E-Mail Address".
Specify the "Connection check operator" if there is another person who needs to be
notified of the setting confirmation result, other than the administrator.
•
Notification (Standard E-Mail format)
Input the "Connection check operator E-Mail Address"
•
Notification(Simple E-Mail format for cell phone)
Input the "Connection check operator E-Mail Address"
•
Not Notification
If notifying the connection check operator of the setting confirmation result at the
REMCS center, input the E-mail address.
Up to 60 alphanumeric characters and symbols (except space)
Input the timeout limit when using SMTP connection.
•
Numeric characters
•
1 - 600 sec.
Input the timeout limit for SMTP response.
•
Numeric characters
•
1 - 3600 sec.
763
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0