Delete Host Affinity - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Connectivity Management
4.1 Host Affinity Management
4.1.2

Delete Host Affinity

This function deletes the registered host affinity in the ETERNUS DX.
When a host affinity is deleted, the paths between "Host Group", "CA Port Group", and "LUN Group" or the
paths between "Host", "CA Port", "and "LUN Group" are also deleted.
• When deleting a host affinity, make sure to stop the access of the host which has been associated with
the host affinity to be deleted.
• The following host affinities cannot be deleted. When deleting, use ETERNUS SF Storage Cruiser.
- The CA port with the host affinity setting is used for the Storage Cluster function
- The LUN group with the host affinity setting is used for the Storage Cluster function
- The host with the host affinity setting is used for the Virtual Volume function
The procedure to delete a host affinity is as follows:
Procedure
1
Select the host affinity to be deleted (multiple selections can be made) and click [Delete
Host Affinity] in [Action].
 A confirmation screen appears.
2
Click the [OK] button.
 The deletion of the host affinity starts.
3
Click the [Done] button to return to the [Connectivity] screen.
350
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0