Fujitsu ETERNUS DX60 S3 User Manual page 552

Chapter 5 RAID Group Management
5.8 Set Key Group (RAID Group)
The procedure to register or delete the RAID groups in the key group is as follows:
Procedure
1
Select which RAID group to add to or delete from the key group (multiple selections can be
made), and click [Set Key Group] in [Action].
Settings for the selected RAID groups are applied in a single process. To add or delete multiple RAID
groups, only select the RAID groups that are to be added or deleted (do not select all of the RAID
groups).
2
Select the key group setting state.
The main setting item is as follows.
●
Key Group Setting
• Key Group
3
Click the [Set] button
 A confirmation screen appears.
If an error screen appears under the following conditions, check the parameter settings.
• If there is a RAID group with a status other than "
• If the status of the key in the key group is not "Normal", "Expiration", or "Modifying"
• If "Enable" is selected but no key group has been created
• If no master or slave server is applied to the key group when "Enable" is selected
552
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Available"
P2X0-1270-13ENZ0