Fujitsu ETERNUS DX60 S3 User Manual page 677

Appendix A Parameter List
A.1 System Management
●
Web GUI Settings
• Function to Add Host
Description
Input condition/
Display contents
Selecting either "Use "Add Host Group"" or "Use "Add Host"" is recommended. If both of these checkboxes are not
selected, the [Set] button cannot be clicked.
Select "Use "Add Host"" only when using the previous procedure for registering hosts as the older storage systems
(such as ETERNUS DX410/DX440 and ETERNUS DX8100/DX8400/DX8700). This checkbox is not selected by default.
Both checkboxes can be selected at the same time.
A.1.3.5 Setup Encryption Mode
For details about this function, refer to
For the factory default settings for this function, refer to
●
Setup Encryption Mode
• Encryption Mode
Description
Input condition/
Display contents
Select which function for adding hosts is to be used.
•
"Use "Add Host Group"" checkbox
Create a host group and register the hosts as members. When the "Use "Add Host
Group"" checkbox is selected, the actions for creating host groups are displayed.
•
"Use "Add Host"" checkbox
Register hosts without creating host groups. When the "Use "Add Host"" checkbox is
selected, the actions for adding hosts are displayed.
•
"Use "Add Host Group"" checkbox
-
Selected
-
Cleared
•
"Use "Add Host"" checkbox
-
Selected
-
Cleared
"1.4.5 Setup Encryption Mode" (page
The current encryption mode is displayed.
When changing the encryption mode, select "Disable", "Fujitsu Original Encryption" or
"AES".
•
Disable
"Disable" means no encryption function is used. When changing the encryption
mode from "Fujitsu Original Encryption" to "Disable" or from "AES" to "Disable",
reboot the ETERNUS DX.
•
Fujitsu Original Encryption
"Fujitsu Original Encryption" is an encryption method which uses a Fujitsu
proprietary algorithm. Compared to AES, its practical security level is almost equal
while it allows faster processing than AES.
•
AES
"Advanced Encryption Standard (AES)" (standard encryption used for information
processing by the US federal government) is a standardized encryption method. The
ETERNUS DX storage systems adopt the AES 128-bit encryption.
677
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
41).
"Appendix B Setup Encryption Mode" (page 973).
P2X0-1270-13ENZ0