Appendix A Parameter List
A.1 System Management
A.1.10.2
Add Key Server
For details about this function, refer to
For the factory default settings for this function, refer to
●
Key Server Setting
•
Domain Name / IP Address
Description
Input condition/
Display contents
•
Port No.
Description
Input condition/
Display contents
•
LAN Port
Description
Input condition/
Display contents
"1.11.2 Add Key Server" (page
Input the domain name (FQDN) or the IP address of the key server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", or
"6to4 address". Refer to
"Available IPv6 Address" (page 107)
current setting is displayed, the IPv6 address is displayed as an abbreviation.
•
For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
•
For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to
"IPv6 Address Notation (Setup Network Environment)" (page 107)
details.
•
For domain name
Up to 63 alphanumeric characters and symbols
Input the port number used to communicate with the key server.
•
Numeric characters
•
1 - 65535
Select the LAN port used to communicate with the key server.
•
MNT
•
RMT
752
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
168).
"Appendix B Add Key Server" (page
983).
for details. When the
for
P2X0-1270-13ENZ0