Fujitsu ETERNUS DX60 S3 User Manual page 829

Appendix A Parameter List
A.4 Connectivity Management
●
Host Setting
• SAS Address
Description
Input condition/
Display contents
A.4.2.7 Add FC/FCoE Host
For details about this function, refer to
For the factory default settings for this function, refer to
■ When registering a host by selecting from the host list
●
Host Setting
• Checkbox to select a host
Description
Input condition/
Display contents
• Name
Description
Input condition/
Display contents
• Host Response
Description
Input condition/
Display contents
Input the SAS address for the SAS host.
•
Hexadecimal numbers (0 - 9, A - F, a - f)
•
16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)
"4.2.9 Add FC/FCoE Host" (page
Select the checkbox of the FC host that is to be registered in the ETERNUS DX.
The host name and host response can only be specified for the selected FC host.
Checkbox
•
Selected
•
Cleared
Input the name for the FC host.
Up to 16 alphanumeric characters, symbols (except "," (comma) and "?"), and spaces
Select a host response to be assigned to an FC host.
The host response list created in the ETERNUS DX is displayed.
•
Solaris MPxIO
•
HP-UX
•
AIX
•
AIX VxVM
•
VS850/SVC
•
BS2000
•
Host responses created in the ETERNUS DX
•
Default
829
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
405).
"Appendix B Add FC/FCoE Host" (page 993).
P2X0-1270-13ENZ0