Fujitsu ETERNUS DX60 S3 User Manual page 932

Appendix A Parameter List
A.6 Thin Provisioning Management
●
RAID Group List
• Controlling CM
Description
Input condition/
Display contents
●
Drive Selection ([Tabular] Tab)
• Checkbox to select drives
Description
Input condition/
Display contents
●
Drive Selection ([Graphic] Tab)
• DE selection list box
Description
Input condition/
Display contents
Select the Controlling CM of the RAID group that is to be created.
""Automatic" and the normal CM number ("CE#x CM#y" or "CM#y") that is installed are
displayed (x: CE number, y: CM number).
Select "Automatic" for normal operations. When "Automatic" is selected, the Controlling
CM that is to be allocated is determined by the RAID group number. Refer to
Controlling CM setting" (page 910)
•
For the ETERNUS DX8700 S3/DX8900 S3
-
Automatic
-
CE#x CM#y
•
For the other models
-
Automatic
-
CM#y
Select the checkbox for the drive to be selected.
When selecting drives, refer to
Checkbox
•
Selected
•
Cleared
Select the DE group.
Options are displayed in the list box when at least one CE or DE in the DE group is
installed in the ETERNUS DX.
Refer to "Options and DE groups for each model" (page 908)
•
DE#0x
•
DE#1x
•
DE#2x
•
DE#3x
•
DE#4x
•
DE#5x
•
DE#6x
•
DE#7x
•
DE#8x
•
DE#9x
•
DE#Ax
•
DE#Bx
932
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details.
"Requirements for selecting drives" (page
for details.
"Automatic
563).
P2X0-1270-13ENZ0