Chapter 4 Connectivity Management
4.4 LUN Group Management
•
The following volumes cannot be registered in the LUN group. These volumes are not displayed as
selectable volumes.
-
Volumes with the mirroring reservation attribute (*1)
-
ODX Buffer volumes
-
NAS volumes that are used in a Unified Storage environment
-
Volumes that are used for the Virtual Volume function (including "$VVOL_META")
*1:
An attribute to be set to a volume being created as the REC copy destination by the Dynamic LUN Mirroring
function. The volumes with this attribute may have been left in the storage system due to unsuccessful creation.
Volumes that have the mirroring reservation attribute can be checked in the "Forbid Advanced Copy" field on the
[Volume] screen. Refer to "Volume (Basic Information)" in "ETERNUS Web GUI User's Guide (Operation)" for
details.
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to create a LUN group is as follows:
Procedure
1
Click [Add LUN Group] in [Action].
2
Specify the LUN group name.
The main setting item is as follows.
●
LUN Group Setting
•
Name
463
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"A.4.4.1 Add LUN Group" (page
"Appendix B Add LUN Group" (page
868).
999).
P2X0-1270-13ENZ0