Fujitsu ETERNUS DX60 S3 User Manual page 375

Chapter 4 Connectivity Management
4.2 Host Group Management
Filter setting
iSCSI Name
Host Group
Host Response
• If the iSCSI host information is not displayed when clicking the [Rediscover] button, make sure that
there is no error in the connection environment, such as the connection between the host and the
switch, and the CA port settings of the ETERNUS DX. If there is no error in the connection
environment, contact the Support Department or manually specify the iSCSI host information.
• If an error screen appears under the following conditions, check the parameter settings.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(3)
Click the [Add] button
 A confirmation screen appears.
Filter
Input the iSCSI name that is to be displayed.
iSCSI hosts matching or partially matching the input iSCSI name are displayed.
When not using the iSCSI name for filtering, leave this item blank.
Input the host group name that is to be displayed.
iSCSI hosts which belong to any host groups that match or partially match the
entered name are displayed.
When not using the host group name for filtering, leave this item blank.
Select the host response that is to be displayed.
Any iSCSI hosts that are allocated to the selected host response are displayed.
The "Host Group Name" is not entered
The "Host Group Name" does not satisfy the input conditions
The "Host Group Name" overlaps with an existing host group name
(Host group names cannot overlap with any other host group names, irrespective of the
interface types.)
The "IP Address" does not satisfy the input conditions
The "IP Address" is specified and an iSCSI host with the same "iSCSI Name" and "IP Address" is
already registered
The "IP Address" is not specified and an iSCSI host with the same "iSCSI Name" and "IP Version"
is already registered
The "Alias Name" does not satisfy the input conditions
The "Alias Name" overlaps the existing Alias name
The "CHAP User ID" does not satisfy the input conditions
The "CHAP Password" does not satisfy the input conditions
The "Confirm CHAP Password" does not satisfy the input conditions
The "CHAP Password" and the "Confirm CHAP Password" do not match
Either of the "CHAP User ID" or the "CHAP Password" has been specified
No hosts are registered in the host group, or more than eight hosts (or more than 64 for the
ETERNUS DX8700 S3/DX8900 S3) are registered
The total number of host groups has exceeded the maximum number for the ETERNUS DX
The total number of hosts has exceeded the maximum number for the ETERNUS DX
A host with an unrecognizable LUN is added
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Description
375
P2X0-1270-13ENZ0