Modify Fc Port Parameters - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Connectivity Management
4.3 CA Port Group Management
3
Click the [Modify] button
 A confirmation screen appears.
4
Click the [OK] button.
 Modification of the CA port group starts.
5
Click the [Done] button to return to the [CA Port Group] screen.
4.3.7

Modify FC Port Parameters

This function sets the parameters for the FC host interface port that connects between the ETERNUS DX and
the host, or connects between the storage systems for REC or Storage Migration.
• When changing port parameters during operation, stop access from the server that is connected to the
target port. Host access does not need to be stopped to change the port parameters of newly added CA
ports.
• The port parameters of an FC-Initiator port that has Storage Migration paths cannot be changed.
• There are four types of port modes for FC ports; CA, RA, CA/RA, and Initiator. CA is used for connecting to a
server, RA is used for REC, CA/RA is used for connecting to a server and for REC, and Initiator is used for
Storage Migration. To change the port mode, refer to
value is "CA".
• For more details on the parameter settings of FC-CA, refer to "FUJITSU Storage ETERNUS DX Configuration
Guide -Server Connection-" for each OS type.
• When changing the port parameters for FC-Initiator port, delete the path group specified in the target
port. Refer to
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to the following sections.
• "Appendix B Modify FC Port Parameters (when the port mode is "CA")" (page 994)
• "Appendix B Modify FC Port Parameters (when the port mode is "RA" or "CA/RA")" (page 994)
• "Appendix B Modify FC Port Parameters (when the port mode is "Initiator")" (page 995)
"1.12.3 Delete Storage Migration Path" (page 187)
441
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"4.3.11 Modify Port Mode" (page
for details.
"A.4.3.6 Modify FC Port Parameters" (page
End of procedure
459). The default
842).
P2X0-1270-13ENZ0