Chapter 4 Connectivity Management
4.2 Host Group Management
If an error screen appears under the following conditions, check the parameter settings.
•
•
•
•
•
•
•
•
•
(4)
Click the [OK] button
Returns to the [Manual Input] screen.
(5)
Repeat
If an error screen appears under the following conditions, check the parameter settings.
•
The "Host Group Name" is not entered
•
The "Host Group Name" does not satisfy the input conditions
•
The "Host Group Name" overlaps with an existing host group name (Host group names cannot
overlap with any other host group names, irrespective of the interface types.)
•
The same iSCSI name is specified for multiple iSCSI hosts
•
When the "IP Address" is specified and an iSCSI host with the same "iSCSI Name" and "IP Address" is
already registered
•
When the "IP Address" is not specified and an iSCSI host with the same "iSCSI Name" and "IP
Version" is already registered
•
The "Alias Name" overlaps the existing Alias name
•
A host cannot recognize some LUNs
•
No hosts are registered in the host group, or more than eight hosts (or more than 64 for the
ETERNUS DX8700 S3/DX8900 S3) are registered
•
The total number of hosts has exceeded the maximum number for the ETERNUS DX
The "iSCSI Name" is not entered
The "iSCSI Name" does not satisfy the input conditions
The "IP Address" does not satisfy the input conditions
The "Alias Name" does not satisfy the input conditions
The "CHAP User ID" does not satisfy the input conditions
The "CHAP Password" does not satisfy the input conditions
The "Confirm CHAP Password" does not satisfy the input conditions
The "CHAP Password" and the "Confirm CHAP Password" do not match
Either of the "CHAP User ID" or the "CHAP Password" has been specified
Step (2)
through
Step (4)
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
to set more iSCSI hosts.
398
P2X0-1270-13ENZ0