Set Dns Server - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Connectivity Management
4.8 NAS Management
2
Enter the name.
The main setting item is as follows.
●
NAS Server Settings
• Name
If the entered name does not satisfy the input conditions, an error screen appears. Check the parame-
ter settings.
3
Click the [Change] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Changing of the NAS server name starts.
5
Click the [Done] button to return to the [Environment Settings] screen.
4.8.8

Set DNS Server

This function sets the DNS server that is used for the NAS system.
This function is used in a Unified Storage environment.
• The DNS server settings must be performed before configuring the authentication server.
• When specifying the secondary IP address, the primary IP address settings cannot be omitted.
• When specifying the IPv6 secondary IP address, the IPv6 primary IP address settings cannot be omitted.
513
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0