Fujitsu ETERNUS DX60 S3 User Manual page 826

Appendix A Parameter List
A.4 Connectivity Management
• IP Version
Description
Input condition/
Display contents
To register an iSCSI host without using an IP address, perform IP version selection as follows:
•
Select "IPv4" when the IP address format of the iSCSI host is IPv4 (when using an IPv4 host)
•
Select "IPv6" when the IP address format of the iSCSI host is IPv6 (when using an IPv6 host)
•
If the IP address format of the iSCSI host cannot be checked (when either an IPv4 host or an IPv6 host is used),
register two hosts. Select "IPv4" for one host, and select "IPv6" for the other host. Specify the same iSCSI name,
CHAP user ID, and CHAP password for each host.
• IP Address
Description
Input condition/
Display contents
• Alias Name
Description
Input condition/
Display contents
The IP version of the iSCSI host is displayed.
To change the IP version, select "IPv4" or "IPv6".
•
IPv4
•
IPv6
IP address of the member host is displayed.
To add an iSCSI host to a host group, select the checkbox of the iSCSI host to be added,
and enter the IP address.
There are two methods to specify an IP address; "IPv4" and "IPv6". The IP address must be
specified with the selected IP version (IPv4 or IPv6). The following IPv6 addresses can be
used; "link local address", "global address", "unique local address", or "6to4 address".
Refer to "Available IPv6 Address" (page 107)
displayed, the IPv6 address is displayed as an abbreviation.
It is not necessary to specify this item if IP address is not used.
•
For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
•
For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
The Alias name of the member host is displayed.
To add an iSCSI host to a host group, select the checkbox of the iSCSI host to be added,
and enter the Alias name.
If the iSCSI host has already been registered in the ETERNUS DX, the Alias name is
displayed.
It is not necessary to specify this item if Alias name is not used.
An existing Alias name cannot be specified.
•
Up to 31 alphanumeric characters and symbols (except "," (comma) and "?")
•
Spaces
826
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details. When the current setting is
for details.
P2X0-1270-13ENZ0