Fujitsu ETERNUS DX60 S3 User Manual page 564

Chapter 6 Thin Provisioning Pool Management
6.2 Create Thin Provisioning Pool
The procedure to create a TPP by selecting drives manually is as follows:
Procedure
1
Click [Create] in [Action].
2
Select "Manual" for the create mode, and specify the other parameters.
The main setting items are as follows.
●
New Thin Provisioning Pool
• Name
●
Manual Setting
• Drive Type
• RAID Level
• Fast Recovery Configuration (not displayed for the ETERNUS DX60 S3)
• Alarm
564
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0