Fujitsu ETERNUS DX60 S3 User Manual page 956

Appendix A Parameter List
A.7 Advanced Copy Management
(Example 2) When applying the created path information to the ETERNUS Disk storage system (the checkbox
for selecting Box ID is cleared)
Storage
system 4
How the path information in the storage system is
to be changed after applying the created path
information is displayed.
Path a: Do not Change, Path b: Do not Change,
Path c: Do not Add
Created path information
Path c Path b
Storage Storage
system 1 system 3
Storage system 2: Cleared, Storage system 3: Selected (*1), Storage system 4: Cleared
Checkbox to
*1: Because there are no differences between "created path information" and "path information
select a Box ID
in the ETERNUS Disk storage system", the checkbox is selected and cannot be changed.
Result of applying
956
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Created path
Path information in the storage system
information
Path a
Storage
is applied
system 2
Application result
Path information in the storage system (actual result of applying)
Path a
Storage Storage
system 2 system 1
Backed up path information (*2)
Path b
Storage
system 1
In the backed up path information, only the part of the "created path
information" that is applied to the ETERNUS Disk storage system is saved.
In this case, the backed up path information does not match "path
information in the ETERNUS Disk storage system".
Downloaded path information (*3)
Path b
Storage
system 1
The downloaded path information is the same as the backed up path
information.
Path b
Storage Storage
system 1 system 3
Path b
Storage
system 3
Obtained path information
Storage
system 3
Storage
system 3
P2X0-1270-13ENZ0