Data∙Acquisition∙Application∙Starting∙(Online)∙Flow∙∙∙∙∙∙∙∙∙∙∙12; User Registration (At Initial Starting) - Fujitsu AIRSTAGE UTY-ASGXZ1 Operating Manual

3-1 Data acquisition application starting (online) flow
This section describes procedures for online work when "Online work" is selected from the
Menu.
3-2-1

User Registration (at initial starting)

To start the Data acquisition application, the user must be verified by user ID and password.
If the user is not registered, user registration processing is started. User registration, change,
and deletion can also be performed at "par. (-6 User Setting".
User ID input field
Input the user ID. (Up to 20 alphanumeric characters) (*1)
Password input field
Input the password. (Up to 20 alphanumeric characters) (*1)
Password confirmation input field
Input the password again for confirmation. (Up to 20 alphanumeric characters) (*2)
OK button
Save the inputted data.
The opening screen is displayed, and operation advances
to site data selection processing.
Cancel button
User registration stops and the Service Tool ends.
Note *1 When the user ID and password input fields are not inputted, an error mes-
sage is displayed.
*2 When the password and password confirmation input contents are different,
an error message is displayed.
12
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.