Table of Contents
Advertisement
Refrigerant circuit address selection field
Select the refrigerant circuit address.
When the checkbox is checked, all the selected Unit Type connected to refrigerant cir-
cuit address are selected at the list of
of
, the selection can be cancelled individually.)
Unit Type selection field
Selects or cancels the Unit Type in which the individual information is required for each
unit.
OK button
Saves the set contents and closes the screen.
Cancel button
Deletes the set contents and closes the screen.
Apply button
Saves the set contents. (The screen is not closed.)
5-13-2
Room Temperature Display Selection
Sets the display method of the room temperature to be displayed by the Monitor application.
When you want to display the room temperature detected by sensor un-
changed, select "actual".
When you want to display the room temperature corrected (used in control) by
the unit, select "adjusted".
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
. (When the checkbox is unchecked at the list
119
Advertisement
Table of Contents
