Fujitsu AIRSTAGE UTY-ASGXZ1 Operating Manual page 75

Indoor unit schematic and graph area
„ „
Displays the schematic and graph of all indoor units connected to refrigerant circuit selected
at the Control area. For the meaning of each item in the schematic, refer to the later "Sche-
matic/graph display item".
Schematic
Display item
Schematic
Schematic
Special operation
icon
Display items
Operation Displays the operating status (ON/OFF) and unit status (Normal/Error).
Mode Displays the operating mode.
Type Displays the unit type.
Name Displays the unit name. (*1)
Displays the setting temperature.
Temp.
Units display is [°C] or [°F]. (*2)
Displays the capacity.
Capacity Units display is [BTU/h] or [kW]. (*2)
Displays {capacity value} when it is set at "par. (-(-1 Display".
VL Displays the vertical louver position.
HL Displays the horizontal louver position.
Indoor Unit Icon
Displays the status of the indoor units. The display color depends on the status.
On: Green Off: Gray Test: Orange
On (Error): Red Off (Error): Red
Test (Error): Red
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
Special operation icon
Displays the schematic for indoor unit.
The R.B. unit status will only be displayed beside the refrigerant circuit when
the system type is heat recovery.
Displays the special operation status using icon. Refer to "List of icon for spe-
cial operation" of "par. (-3 System List".
Graph
(Graph 1)
(Graph 2)
73