Table of Contents
Advertisement
Address Checker
Opens the address checker screen. Refer to "par.3-2-7 Address Checker".
Perform scan without obtaining error information
When it is not necessary to acquire the error information by scan, check the checkbox.
Perform System Initialization check
Can be used only when
Check when you want to acquire more detailed informa-
tion by scanning. (*2)
When checked, a confirmation screen is displayed. When the [Yes] button is clicked, all
the units in the VRF System may be stopped.
When the [No] button was clicked, the check mark is removed.
OK button
• When "Enable Scan" checked
Scanning starts and scanning progress is displayed on the scanning progress
screen.
Before scanning starts, whether or not scanning is to
be performed is displayed on a confirmation screen.
When re-scanning, dialog box will appear confirming
whether the existing indoor/outdoor units data (opera-
tion data, etc.) may be deleted,after selecting the start
of scan.
Yes ... delete the data after scanning, No ... Keep the
data,
* When "No" is selected, please confirm that the number of units is the same as the
data currently held.
If "No" is selected and the number of units differs before and after scanning, the
following reasons are possible.
• A communication error has occurred.
• Data collection delay is occurring.
• When "Enable Scan" not checked
The system list screen is displayed without scanning. But when CSV formatted
Name Master File ("par. 3-2-4 Name Master Database file selection screen") has
been already read, the corresponding Name of the unit will be updated.
Cancel button
Displays the online site selection screen.
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
is checked.
[OK] button
19
Advertisement
Table of Contents
