Setting Up The Printer After Transportation; Uninstalling And Reinstalling The Printer Driver - Epson Stylus Pro 4000 Printer Manual

92 | Maintaining and Transporting the Printer
Caution: Make sure you
release the print head by
pulling out the green tab.
7. Keep the printer level while moving it.

Setting Up the Printer After Transportation

Setting up the printer after transporting it is almost identical to setting it up
for the first time, as described on the Start Here sheet.
Keep in mind that the first time you start printing after moving the printer,
the print head nozzles may be clogged—especially if the printer hasn't been
turned on for a long time. You may need to run a cleaning cycle (page 75)
and realign the print head (page 78) to ensure good print quality.
If you see the message
after setting up the printer, select
described on page 77.

Uninstalling and Reinstalling the Printer Driver

If you need to uninstall and then reinstall the printer driver software for any
reason, follow the instructions in the appropriate section below.
Macintosh
1. Insert your printer software CD-ROM. Then double-click the
CD-ROM icon to open it, if necessary.
2. Double-click the
3. Double-click
Install Printer Driver and Utilities.
4. Enter your password if necessary.
5. Click on the next screen.
Continue
6. Click on the license agreement screen.
Accept
7. On the installer screen, click the arrow in the Easy Install list at the top
and select
Uninstall
and follow the on-screen instructions.
4-92
PERFORM POWER CLEANING?
to start the power cleaning process, as
Y
program to open it.
Installer
. Then click the
Uninstall
on the LCD panel
button at the bottom