32
|
Handling Paper and Other Media
3. To remove the adapters, press toward the center on the four tabs shown
below.
Press tabs to release
Attaching the Spacer to the Spindle
If you want to create borderless prints on roll paper with a width of 8 inches
(non-EPSON media), you need to use the spacer. You can only use the
spacer when the adapters are removed from the spindle (2-inch core only).
1. Slide the black paper stop off the end of the spindle.
2. Slide the spacer onto the spindle.
3. Slide the paper onto the spindle.
4. Slide the black paper stop back onto the spindle and insert it firmly into
the end of the roll.
1-32