Creating A Custom Preset And Printing - Epson Stylus Pro 4000 Printer Manual

54 | Printing with EPSON Drivers for Macintosh
Note: These settings
override settings made
through the control panel.
Note: If you check the
settings on each screen
in the pull-down menu,
go through them carefully
from top to bottom.
Avoid cycling through
them repeatedly, or you
may lose your settings.
Caution: Do not open
and close the Presets
pull-down menu without
typing a name, or you will
lose your settings.
3. Select either of the following options:
• Print Page Line
your pages.
• Save Roll Paper
the last page of your document. Available only when you've selected
Roll Paper (Banner)

Creating a Custom Preset and Printing

Once you've made the correct settings for your print job, create a custom
preset. This will save you time when you use the same
profile/printer/ink/media combination for future print jobs.
1. Select
Summary
2. After verifying that your settings are correct, select
Presets pull-down menu.
3. Type a name, and click
4. When you're ready to print, click the Print button. The Print Center
icon appears in the dock on the bottom of your desktop.
See the next section for instructions on monitoring your print job.
2-54
prints trim lines on the right and bottom edges of
saves paper by not feeding the blank portion of
as the Paper Source.
from the pull-down menu.
.
OK
from the
Save As