Epson Stylus Pro 4000 Printer Manual page 52

52 | Printing with EPSON Drivers for Macintosh
• Drying Time per Print Head Pass
non-EPSON media and avoid smearing the ink. You can make the
print head wait up to 5 seconds after each pass to allow ink to dry on
the page.
• Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
lets you decrease the paper suction level when
• Paper Suction
printing on thinner papers (less than 12 lb), such as CAD drafting
paper or backlight film.
• Paper Thickness
image when printing on unusually thick or thin paper.
decreases the cutting blade pressure for thinner media,
• Cut Method
or adjusts the speed for thick media. You may need to experiment to
determine the best setting for your paper.
lets you fine-tune the setting for various paper
• Platen Gap
thicknesses.
• Eject Roller Type
non-EPSON media. You may need to experiment to determine the
best setting for your paper.
2-52
lets you print with
helps eliminate banding. Choose a lower
eliminates vertical banding and creates a sharper
lets you define the eject roller for printing on