Epson Stylus Pro 4000 Printer Manual page 51

Note: Be sure to check
the Color Density setting.
You may need to change
it if your color profile was
created to optimize
D-max and color gamut.
Printing with EPSON Drivers for Macintosh
to select from three Rendering Intent settings for
• Color Sync
mapping colors to your printer's profile. In most cases, you will get
better results by applying color management in your application,
rather than in the printer driver.
• No Color Adjustment
driver. Choose this mode when you use a color-managed workflow
in Photoshop or other software applications.
3. If you are using non-EPSON media and you need to fine-tune its
performance, select Paper Configuration from the pull-down menu.
You see this screen:
Select the Paper
Configuration page
4. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer's control panel.
• Color Density
when you turn off color management in your printer software).
2-51
to disable color management in the printer
lets you control the ink saturation level (for example,
| 51