Jacking Points
•
On the front of the machine on the frame on the inside
of each drive tire
(Figure
1. Front jacking point (2)
•
On the rear of the machine at the center of the axle
(Figure
39).
1. Rear jacking point
38).
Figure 38
Figure 39
Tie Downs
•
Under the front of the operator's platform (2 places)
(Figure
40).
1. Front tie down (2)
•
The rear bumper (2 places)
1. Rear tie down (2)
35
Figure 40
(Figure
41).
Figure 41