Towing the Traction Unit
In case of an emergency the machine can be towed for
a short distance (less than 1/4 mile (0.4 km)). However,
Toro does not recommend this as standard procedure.
Important: Do not tow the machine faster than
2-3 MPH (3-5 km/h) because the drive system
may be damaged. If the machine must be moved
a considerable distance, transport it on a truck or
trailer.
1. Locate the bypass valve on the pump and rotate it
so that the slot is vertical (Figure 35 ).
Figure 35
1. Bypass valve-slot shown in closed (horizontal) position
2. Before starting the engine, close the bypass valve by
rotating it so that the slot is horizontal (Figure 35).
Do not start the engine when the valve is open.
28