Toro 74311TE Operator's Manual page 10

With 122cm direct-collect cutting unit
Hide thumbs Also See for 74311TE:
Table of Contents

Advertisement

116-8946
1. Rotate counterclockwise
to release
2. Rotate clockwise to lock
1. Read the Operator's Manual before performing any
maintenance.
2. Check the engine oil every 8 hours.
3. Grease the front caster wheel bearings every 8 hours.
4. Check the hydraulic fluid level every 40 hours (only use
recommended hydro oil).
5. Check the ttire pressure every 40 hours.
6. Grease the deck drive PTO every 40 hours.
7. Check the air cleaner every 40 hours.
3. Unlock to push the
machine
4. Read the instructions
before servicing or
performing maintenance.
116-9044
8. Grease the deck lock mechanism every 100 hours.
9. Grease the deck pivots every 100 hours.
10. Check the gearbox oil every 100 hours (use only Mobil 1
75W-90 gear oil).
11. Grease the front caster pivots every 500 hours.
12. Grease the rear caster pivot every 500 hours.
13. Grease the rear caster wheel every 500 hours.
14. Grease the belt idlers every 500 hours.
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master 8000 series

Table of Contents