Fuel System Maintenance; Replacing The Fuel Filter - Toro 74311TE Operator's Manual

With 122cm direct-collect cutting unit
Hide thumbs Also See for 74311TE:
Table of Contents

Advertisement

2
1
3
Figure 44
Fuel System
Maintenance
WARNING
Fuel system components are under high pressure.
The use of improper components can result in
system failure, gasoline leakage, and possible
explosion.
Use only approved fuel lines and fuel filters.

Replacing the Fuel Filter

G015200
Service Interval: Every 200 hours/Yearly (whichever comes
The fuel filter is located near the engine on the front or rear
side of the engine.
1. Move the speed-control lever to the N
to stop the machine.
2. Disengage the PTO, engage the parking brake, shut off
the engine, and wait for all moving parts to stop.
3. Allow the machine to cool down
1. Fuel filter
2. Hose clamp
4. Squeeze the ends of the hose clamps together and slide
them away from the filter
5. Remove the filter from the fuel lines.
38
first) (more often in dirty or dusty
conditions).
3
G008963
Figure 45
3. Fuel line
(Figure
position
EUTRAL
(Figure
45).
1 2
45).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master 8000 series

Table of Contents